Star-Delta Starter Panel

Supply of Starter Panel

  1. 75HP Compressor motor Starter – 1 no
  2. 2.5HP Agitator Starter – 2 nos
  3. 7.5HP Pump Starter – 2 nos
  4. 2HP Water Pump Starter – 1 no

SIEMENS Grey Powder coated panel with CRCA 16SWG Sheet thickness, 250A rating Copper Bus bar

  1. Incomer 250A, TPN, SFU with HRC Fuse L&T  make     – 1 no
  2. Control MCB, DP                                       – 1 no
  3. Single Phase Preventer                            –  1 no
  4. Control MCB, SP                                       – 4 nos
  5. Aux. Contactor                                           – 1 no
  6. RYB Lamps (LED) – 1 set
  7. Power Contactor 110A, 230V AC                –  3nos
  8. Over load relay(60-90)A                               –  1no
  9. On Delay timer – 8no
  10. MCB 4P 40A                                             – 2nos
  11. Power Contactor 25A 230V AC                – 2nos
  12. OLR                                                           -4nos
  13. Power Contactor 16A, 230V AC              – 4nos
  14. Pushbuttons with NC Red – 6 nos
  15. Pushbuttons with NO Green – 6 nos

Panel fabrication, bus bar arrangement, complete power and control wiringp_20151218_174519.jpg

Supply of Motor Starter Panel Consisting of

  1. BCH make 10HP STAR/DELTA starter        – 1no
  2. BCH make 20HP STAR/DELTA Starter        – 1no
  3. 40A contactor                                              – 3Nos
  4. BCH make Up to 5HP DOL Starter              -15nos
  5. Ammeter                                                       – 1no
  6. Voltmeter                                                      – 1no
  7. Ammeter Selector Switch                             – 1no
  8. Voltmeter Selector Switch                            – 1no
  9. Current Transformer 400/5                           – 3nos
  10. RYB Indicating Lamps                                  – 1set
  11. Control MCB’s                                              – 3nos
  12. MCB – TP, 63A                                           – 2no
  13. MCB – TP, 32A C                                       – 15nos
  14. MCB boxes                                                 – 17nos
  15. Connectors                                                 – 60nos

MS box with SIEMENS Grey Powder Coated, Copper Bus bar arrangements, complete Power and Control Wiring

Supply of Motor Starter Panel Consisting of

  1. Incomer – SFU 630A TPN with HRC Fuses – 1no           L&T make
  2. Ammeter                                                       – 1no
  3. Voltmeter                                                      – 1no
  4. Ammeter Selector Switch                             – 1no
  5. Voltmeter Selector Switch                            – 1no
  6. Current Transformer 630/5                           – 3nos
  7. RYB Indicating Lamps                                  – 1set
  8. Control MCB’s                                              – 3nos
  9. MCB  TP                                                      -52nos
  10. MCCB TP                                                     – 6nos
  11. Voltage monitoring relay                             – 1no
  12. MCB DP                                                      – 1no
  13. MCB SP                                                       -4nos
  14. Aux. Contactor                                             -1no
  15. BCH make up to 5HP DOL Starters             -44nos
  16. BCH make 20HP STAR/DELTA Starter       -2nos
  17. BCH make 10HP STAR/DELTA Starter       -4nos
  18. BCH make 15HP STAR/DELTA Starter       -2nos
  19. BCH make 40HP STAR/DELTA Starter       -4nos
  20. BCH make 50HP STAR/DELTA Starter       -2nos
  21. Suitable Connectors
  22. Remote Start/Stop controls

MS box with SIEMENS Grey Powder Coated, Copper Bus bar arrangements, complete Power and Control Wiring

  • 630A TPN SFU with HRC fuses suitable MS box
  • Supply of 100kvar Automatic Power Factor Control Panel with copper cable, erection and commissioning.
  • Supply of CT meter Panel

Supply of Motor Starter Panel Consisting of

  1. Incomer SFU 250A TPN with HRC Fuses    – 1no                 L&T make
  2. Ammeter                                                       – 1no
  3. Voltmeter                                                      – 1no
  4. Ammeter Selector Switch                             – 1no
  5. Voltmeter Selector Switch                            – 1no
  6. Current Transformer 250/5                           – 3nos
  7. RYB Indicating Lamps                                  – 1set
  8. Red Indication Lamps                                 – 14nos
  9. Control MCB’s                                              – 3nos
  10. MCB  TP                                                      -14nos
  11. BCH make up to 5HP DOL Starters             -13nos
  12. BCH make 20HP STAR/DELTA Starter
  13. (40A Power Contactor)                                  -1no
  14. BCH make 7.5HP STAR/DELTA Starter       -1no
  15. ON/OFF Push buttons                                 -15sets
  16. Provision for DOL Starter (Spare)                  -2nos
  17. Provision for STAR/DELTA Starter(Spare)    -2nos
  18. Pushbutton Box                                             – 2nos
  • Panel Size : 6.5”(H)x6.3”(W)x1”(D)
  • Panel Size : 1975(H)x1900(W)x300(D)

MS box with SIEMENS Grey Powder Coated, Copper Bus bar arrangements, complete Power and Control Wiring

22KW Star/Delta Starter Panel

  • Main Incomer 63A, TPN,SFU with Fuse
  • Over Load Relay (20-30)A
  • Contactor 45A with 1NO+1NC
  •  ON Delay Timer
  •  Control MCB’s
  • Indicating Lamps R, Y, B
  •  Red LED Indication Lamp
  • Pushbuttons,Connectors
  • Ammeter with CT and SS
  • complete control and power wiring

45KW Star/Delta Starter Panel 

  • Main Incomer 125A, TPN,SFU with Fuse
  • Over Load Relay (45-55)A
  •  ON Delay Timer
  •  Control MCB’s
  • Indicating Lamps R, Y, B
  •  Red LED Indication Lamp
  • Pushbuttons,Connectors
  • Ammeter with CT and SS
  • complete control and power wiring

Supply of Motor Starter Panel Consisting of

  • Incomer – SFU 200A TPN with HRC Fuses – 1no   L&T make
  • BCH  within 20HP STAR/DELTA Starter     -4nos
  • BCH DOL Starter                                       – 18nos
  • Ammeter                                                       – 1no
  • Voltmeter                                                      – 1no
  • Ammeter Selector Switch                             – 1no
  • Voltmeter Selector Switch                            – 1no
  • Current Transformer 200/5                           – 3nos
  • RYB Indicating Lamps                                  – 1set
  • Control MCB’s                                              – 3nos
  • MCB  TP                                                     -22nos
  • Voltage monitoring relay                             – 1no
  • MCB DP                                                      – 1no
  • MCB SP                                                       -4nos
  • Aux. Contactor                                             -1no
  • Suitable Connectors
  • Remote Start/Stop controls
  • MS box with SIEMENS Grey Powder Coated, Copper Bus bar arrangements, complete Power and Control Wiring

Supply of Motor Starter Panel Consisting of

  • Incomer – SFU, 400A, TPN with HRC Fuses – 1no      L&T make
  • BCH make Up to 7.55HP DOL Starter         -21nos
  • BCH make 20HP STAR/DELTA Starter        – 1no
  • BCH make 10HP STAR/DELTA Starter        – 1no
  • BCH make 30HP STAR/DELTA Starter        – 1no
  • Ammeter                                                       – 1no
  • Voltmeter                                                      – 1no
  • Ammeter Selector Switch                             – 1no
  • Voltmeter Selector Switch                            – 1no
  • Current Transformer 400/5                           – 3nos
  • RYB Indicating Lamps                                  – 1set
  • Control MCB’s                                              – 3nos
  • MCB – 4P, 63A                                           – 1no
  • MCB – 4P, 32A C                                       – 21nos
  • Control Transformer                                   – 1 no
  • Pushbuttons Green/Red                             – 36nos
  • Indicating Lamps Red                                – 18nos
  • Connectors                                                 – 60nos
  • MS box with SIEMENS Grey Powder Coated, Copper Bus bar arrangements, complete Power and Control Wiring

Note : Provision for 4 nos DOL Starter and 2nos STAR/DELTA Starter.

  • Panel Size : 1900(H) X 2150(W) X 300(D)

Supply of Motor Starter Panel Consisting of

  • Incomer – SFU 400A TPN with HRC Fuses – 1no    L&T make
  • Ammeter                                                       – 1no
  • Voltmeter                                                      – 1no
  • Ammeter Selector Switch                             – 1no
  • Voltmeter Selector Switch                            – 1no
  • Current Transformer 400/5                           – 3nos
  • RYB Indicating Lamps                                  – 1set
  • Control MCB’s                                              – 3nos
  • MCB  TP                                                      -25set
  • Voltage monitoring relay                             – 1no
  • MCB DP                                                      – 1no
  • MCB SP                                                       -4nos
  • Aux. Contactor                                             -1no
  • BCH make up to 5HP DOL Starters             -21nos
  • BCH make 20HP STAR/DELTA Starter       -4nos
  • ON/OFF Push buttons                                 -30sets
  • Provision for DOL Starter (Spare)                  -4nos
  • Provision for STAR/DELTA Starter(Spare)    -1no
  • MS box with SIEMENS Grey Powder Coated, Copper Bus bar arrangements, complete Power and Control Wiring        

Supply of Starter Panel as per your Specification

  1. 20HP Star/Delta Starter – 1 no
  2. 7.5HP Star/Delta Starter – 1 no
  3. Up to 5HP DOL Starter – 16 nos
  • Desk type Panel Size: 1800(W)X1000(H)X600(D)     Powder coated panel with CRCA 16SWG Sheet thickness, 250A rating Copper Bus bar
  1.  Incomer 250A, TPN, SFU with HRC Fuse L&T  make      – 1 no
  2. Control MCB, DP                                       – 1 no
  3. Single Phase Preventer                            –  1 no
  4. Control MCB, SP                                       – 4 nos
  5. Aux. Contactor                                           – 1 no
  6. Ammeter                              – 1 no
  7. Voltmeter                                    – 1 no
  8. RYB Lamps (LED) – 1 set
  9. Current Transformers – 3 nos
  10. 10.Power Contactor 16A, 230V AC              –  19nos
  11. Over Load Relay –  17nos
  12. MCB, TPN, 40A –  1no
  13. MCB, TPN, 32A – 16 nos
  14. 14.Power Contactor 40A, 230V AC(HD)      –   3nos
  15. Over Load Relay –  1no
  16. On delay Timer – 1no
  17. MCB, TPN, 63A – 1 no
  18. Add on Block 1NO+1NC for Contactor – 22 nos
  19. RED Indication Lamps(LED) – 18nos
  20. Pushbuttons with NC Red – 18 nos
  21. Pushbuttons with NO Green – 18nos

Panel fabrication, bus bar arrangement, complete power and control wiringSupply of Starter Panel

  1. 10HP DOL Starter – 1 no
  2. 7.5HP DOL Starter – 8 nos

SIEMENS Grey Powder coated panel with CRCA 16SWG Sheet thickness, 200A rating Copper Bus bar

  1. Incomer 200A, TPN, SFU with HRC Fuse L&T  make    – 1 no
  2. Control MCB, DP                                       – 1 no
  3. Single Phase Preventer                            –  1 no
  4. Control MCB, SP                                       – 4 nos
  5. Aux. Contactor                                           – 1 no
  6. Ammeter                              – 1 no
  7. Voltmeter                                    – 1 no
  8. RYB Lamps (LED) – 1 set
  9. Current Transformers – 200/5  –  3 nos
  10. Power Contactor 25A, 230V AC                –  8nos
  11. Motor Production Circuit Breaker(7.5HP) – 8nos
  12. Power Contactor 32A, 230V AC                 – 1no
  13. Motor Production Circuit Breaker(10HP) – 1no
  14. Add on Block 1NO+1NC for Contactor – 9 nos
  15. RED Indication Lamps(LED) – 9 nos
  16. Pushbuttons with NC Red – 9 nos
  17. Pushbuttons with NO Green – 9 nos

Panel fabrication, bus bar arrangement, complete power and control wiring

Supply of Motor Starter Panel Consisting of

  1. Incomer – SFU, 400A, TPN with HRC Fuses – 1no  L&T make
  2. BCH make 20HP STAR/DELTA Starter         – 1no
  3. BCH make Up to 5HP DOL Starter              -17nos
  4. Ammeter                                                       – 1no
  5. Voltmeter                                                      – 1no
  6. Ammeter Selector Switch                             – 1no
  7. Voltmeter Selector Switch                            – 1no
  8. Current Transformer 400/5                           – 3nos
  9. RYB Indicating Lamps                                  – 1set
  10. Control MCB’s                                              – 3nos
  11. MCB – TP, 63A                                           – 1no
  12. MCB – TP, 32A C                                       – 17nos
  13. MCB boxes                                                 – 17nos
  14. Pushbuttons Green/Red                             – 36nos
  15. Indicating Lamps Red                                – 18nos
  16. Connectors                                                 – 60nos

MS box with SIEMENS Grey Powder Coated, Copper Bus bar arrangements, complete Power and Control Wiring

Supply of Starter Panel as per your Specification

  1. DOL Starters – 1 no
  2. Star/Delta Starter – 9 nos
  3. Panel Size: 1475(W)X1100(H)X250(D)

Powder coated panel with CRCA 16SWG Sheet thickness, Copper Busbar

  1. Incomer 160A, TP, MCCB with rotary handle   – 1 no
  2. Control MCB, DP                                       – 1 no
  3. Single Phase Preventer                            –  1 no
  4. Control MCB, SP                                       – 4 nos
  5. Aux. Contactor                                           – 1 no
  6. VAF Meter – 1 no
  7. RYB Lamps (LED) – 1 set
  8. Current Transformers – 3 nos
  9. Power Contactor 16A, 230V AC              – 9 nos
  10. Over Load Relay – 9 nos
  11. MCB, 4P – 9 nos
  12. Power Contactor 40A, 230V AC              – 3 nos
  13. Over Load Relay – 1 no
  14. MCB, 4P – 1 no
  15. On delay Timer – 1 no
  16. Add on Block 1NO+1NC for Contactor – 10 nos
  17. RED Indication Lamps(LED) – 10 nos
  18. Pushbuttons with NC Red – 10 nos
  19. Pushbuttons with NO Green – 10 nos

Panel fabrication, busbar arrangement, complete power and control wiring with connectors

Supply of Starter Panel as per your Specification

  1. DOL Starters upto 5HP – 25 nos
  2. 15HP Star/Delta Starter – 4 nos
  3. 30HP Star/Delta Starter – 2 nos

Panel Size: 2200(W)X1800(H)X300(D)

Powder coated panel with CRCA 16SWG Sheet thickness, 400A rating Copper Busbar

  1. Incomer 400A, TPN, SFU with HRC Fuse L&T  make     – 1 no
  2. Control MCB, DP                                       – 1 no
  3. Single Phase Preventer                            –  1 no
  4. Control MCB, SP                                       – 4 nos
  5. Aux. Contactor                                           – 1 no
  6. Digital Ammeter – 1 no
  7. Digital Voltmeter – 1 no
  8. RYB Lamps (LED) – 1 set
  9. Current Transformers – 3 nos
  10. 10.Power Contactor 16A, 230V AC              – 25 nos
  11. Over Load Relay(Upto 5HP) – 25 nos
  12. MCB, TPN, 32A – 25 nos
  13. Power Contactor 25A, 230V AC              – 12 nos
  14. Over Load Relay – 4 nos
  15. MCB, TPN, 40A – 4 nos
  16. Power Contactor 40A, 230V AC(HD)      – 6 nos
  17. Over Load Relay – 2 nos
  18. On delay Timer – 6 nos
  19. Add on Block 1NO+1NC for Contactor – 40 nos
  20. MCCB, TP,100A L&T make – 2 nos
  21. RED Indication Lamps(LED) – 31 nos
  22. Pushbuttons with NC Red – 31 nos
  23. Pushbuttons with NO Green – 31 nos

Panel fabrication, busbar arrangement, complete power and control wiring

50HP STAR/DELTA PANEL

  1. Incomer 200A, TPN, SFU with HRC Fuse L&T  make   – 1 no
  2. Control MCB, SP                                       – 8 nos
  3. Single Phase Preventer                            –  2 nos
  4. RYB Lamps (LED) – 2 set
  5. Power Contactor 70A, 230V AC                – 6 nos
  6. Over Load Relay(CT operated) – 2 nos
  7. On delay Timer – 2 nos
  8. RED Indication Lamps(LED) – 2 nos
  9. Pushbuttons with NC Red – 2 nos
  10. Pushbuttons with NO Green – 2 nos

Panel fabrication, busbar arrangement, complete power and control wiring