Engineering Design

STRUCTURAL ANALYSIS :

  • Operating /Inplace
  • Storm
  • Damage
  • Transit
  • Blast
  • Thermal
  • Dropped Objects
  • Fatigue

DESIGN & MODELLING:
– Modeling
– Foundation Modeling
– Material Take off estimation
– Equipment Integration
– Outfitting drawings
– Joint detail Drawings
– Local Analysis

  • Structural Drafting, 3D Modeling
  • Bill of Quantities and material specifications
  • Local and Global strength analysis, hydrodynamic – model analysis
  • Load outs, float off, float over analysis

Mechanical Engineering

Selecting and specifying:

  • Blowers
  • Boilers, Turbines & Engines
  • Pumps and Compressors
  • Preparation of Data Sheets and Purchase Specifications
  • Requisitioning and Review of Vendor Drawings/Specifications.
  • Vibration Analysis

Piping Engineering

  • Detail Layout for Overall Topside
  • Equipment Layout Drawings
  • Piping Materials Specifications
  • Specifications for Specialty Items
  • Piping General Arrangement (GA)
  • Piping Isometrics
  • Pipe Stress Analysis
  • Pipe Support Design
  • Material Take Off (MTO)

Electrical Engineering

Power System Studies.
– Load Flow
– Short Circuit
– Motor Starting etc

  • Power Generation and System Design
  • Single Line Diagrams (SLDs)- ETAP
  • Protection Relay Coordination Diagram
  • Cable System Design, Scheduling and Take – off
  • Lighting System Design
  • Uninterrupted Power Supplies (UPS) – Design and- Specification
  • Cable & Equipment layout
  • Electrical Terminal Connection Diagram
  • Requisitioning and Review of Vendor Drawings/Specifications

Instrumentation Engineering

Instrumentation Design Basis
Control Philosophy and Specificationsfor :

  • DistributedControl Systems
  • Programmable Logic Controllers
  • Emergency Shut Down Systems
  • Fire and Gas Detection System
  • Philosophy andSpecification
  • Sizing of Control Valves, Flow Elements,
  • Safety Valves, etc.
  • Data Sheets/Specifications for Instruments,
  • Control Valves, Safety Relief Valves etc.
  • Instrument Bulk Material Takeoff
  • Cable Selection and Scheduling
  • Control Room Design including Panel, Consol
  • Layouts
  • Cable Tray Layout and Conduit Routing
  • Instrument Installation Hookups
  • Instrument Loop Diagrams and Instrument Indexing
  • Review of Vendor Drawings and Documents

Process Engineering

  • Process Simulation& ProcessOptimization
  • Flow Sheet development with Heat and
  • Material balances
  • Preparation of PFD and P&ID
  • Specifications for Process Equipment and Instruments
  • Basic Engineering Package for Process
  • Units, Utilities
  • Conceptual Topside Layout
  • Process Control Philosophy
  • Process Shutdown Philosophy (Normal & Emergency)
  • Cause and Effect Diagram
  • HAZID, HAZOP and SIL Studies

Marine Engineering

  • Marine Architecture Design Basis
  • Steel Renewal Philosophy
  • Damage Control Plan
  • Tank Capacity
  • Helideck Layout
  • Stability Booklet
  • Hull Deflection
  • Weight Control Report
  • Hull Strength & Fatigue Analysis
  • Topside Stool & Hull Interface
  • Rescue Boat arrangement
  • Greenwater Protection